|
This is the same controller used by thousands of pro racers and pro street riders for the last 8 years!
The Schnitz Electronics Progressive Nitrous Controller utilizes a digital micro-controller for precise timing and control over the injection of nitrous oxide. The rate of nitrous injection is programmable for beginning and final power percentages. The unit also contains a built in digital delay timer allowing precise control of the starting time of the nitrous injection. An advanced feature is the ability to select the pulse frequency that the nitrous and fuel solenoid operate at. Also, a +12 volt output is available for activating an ignition retard unit or relay. The output is controlled by a digital timer. The timer starts when the unit is activated.
Adjustable in 1% increments 20-100%.
Built in timers for the Progressive, and an additional timer that can control another stage of NOS.
No diodes, or relays needed, just five wires to hook-up.
Adjustable pulse frequency from 20 to 40.
Used by the fastest four cylinder cars and bikes in the country.
The PNC-101 comes with the wiring harness, but they are also available separately.
NOTE: The timer system in this unit will automatically reset 20 seconds after being activated. If the activation power is removed and then re-activated, the Progressive Nitrous Unit will continue from the point where activation was halted. If you get out of the throttle and get back into it, you pick up at the point where you left off at.
Click for the Product Manual
(you must have Adobe Acrobat installed)
Price:
$499.95
|
